| Type | Straight Pole ,Suspension Pole |
| Suit for | pole for traffic sign |
| Shape | Multi-pyramidal,Columniform, Round, Polygonal (Octagonal, Dodecagonal, Hexadecagonal, etc) |
| Material | Usually Q345B/A572,minimum yield strength>=345n/mm2 Q235B/A36,minimum yield strength>=235n/mm2 |
| Power | 10 KV ~220 KV |
| Height | 8/10/12m |
| Wight | 1350g |
| Thickness | 2-12mm |
| Joint of Poles | Slip joint , flange connected |
| Wall Thickness | 50mm |
| Height | From 9 meter to 100 meter |
| Length of per section | Within 14m once forming without slip joint. |
| MOQ | 6 |
| Bolts and Nuts | Mainly ISO 898 grade 6.8 and 8.8 bolts for Both Chinese, ISO and DIN standard |
| Base plate | Base plate is square/round/Polygon with slotted holes for anchor bolt and dimension as per client’s requirement. |
Traffic sign poles are also called road sign poles, highway sign poles. The posts on both sides of the highway are used to indicate traffic routes. The traffic sign poles are made of steel pipes, and the surface is hot-dip galvanized.
Generally, there are single-pillar traffic sign poles and multi-pillar traffic sign poles.
The inner edge of the pillar sign should not intrude into the road construction boundary. The height of the lower edge of the traffic sign board and the road surface is divided into: expressway no less than 5500mm, national road , The provincial road is not less than 5000mm. When installed on urban roads with a large proportion of small cars, the height of the lower edge from the ground can be effective according to the actual situation, but it should not be less than 120cm.
The single-post traffic sign pole is a sign board installed on a column, which is suitable for small and medium-sized warning, prohibition, indicator signs and small road signs. The multi-pillar traffic sign pole is a sign board installed on two or more uprights, which is suitable for rectangular indication or guide signs. Cement street light poles are attached to the urban power poles or erected separately because of their bulkiness, high transportation cost, and more risk. Now the market has gradually phased out this kind of street light poles. The method adopted in our country is to conduct hot-dip galvanizing surface treatment, and the life of hot-dip galvanizing products that meet international standards can reach 15 years. Otherwise it is far from reach. Mostly used in courtyards, communities, parks and other places. Heat resistance, high temperature resistance, low temperature resistance and even ultra-low temperature resistance.
